Hi,
I have a problem since I upgraded to version 3.4.5. When do I get an FTP client to a domain under a non-standard listener (2122. 2222, etc. ..) the ftp client is waiting for the list of files / directories. However accessing the port 21 is working properly. Any suggestions?
regards,
Jordi Tarda
Problem after update
-
- Site Admin
- Posts: 2083
- Joined: Tue Sep 29, 2009 6:09 am
Re: Problem after update
First try to connect from localhost (127.0.0.1), if it succeeds from localhost, maybe this issue was related with your router/firewall.
Second, did you forward the FTP PASV ports in your router/firewall? If you use port 21 for FTP listening, some router will detect PASV ports automatically. But when you use non-standard listener, router will not be so smart, then PASV connection will fail. So you need to forward this ports manually, if you don't know how to do, please check out this post: http://www.wftpserver.com/bbs/viewtopic.php?f=5&t=5
Good luck!
Second, did you forward the FTP PASV ports in your router/firewall? If you use port 21 for FTP listening, some router will detect PASV ports automatically. But when you use non-standard listener, router will not be so smart, then PASV connection will fail. So you need to forward this ports manually, if you don't know how to do, please check out this post: http://www.wftpserver.com/bbs/viewtopic.php?f=5&t=5
Good luck!
-
- Posts: 2
- Joined: Wed May 12, 2010 5:57 pm
Re: Problem after update
Hi,
is strange because everything worked ok until I updated to version 3.4.5. The firewall configuration has not changed. Of all ways I'll check it again
Thank you very much
is strange because everything worked ok until I updated to version 3.4.5. The firewall configuration has not changed. Of all ways I'll check it again
Thank you very much