|Top Previous Next|
Send FEAT Command: By enable this option, FTPRush will send 'FEAT' command to FTP Server when connecting. FEAT command will ask FTP Server to list its extension commands, or extended mechanisms.
Connect Timeout: sets the timeout (in seconds) when connecting to a ftp server. If no response is received for a specified number of seconds FTPRush aborts the connection.
Timeout of waiting FTP reply message: sets the timeout (in seconds) when sending ftp commands to a ftp server. If no response is received for a specified number of seconds FTPRush aborts the connection.
Max Retries: Sets the maximum number of times FTPRush will retry connecting to a ftp server before it gives up
ConnectRetry Delay: Sets the time (in seconds) FTPRush will wait before retry connecting
Cycle FTP Server IP List when login Failed: choose whether FTPRush uses other IP addresses in Ftp server IP list when fail to connect to the FTP server
FTPRush will reconnect to FTP automatically if found reply messages from FTP Servers match the text inside this Listbox
Smart Handle FTP server behinds NAT: when FTP server behinds a NAT(Network Address Translation) network, it may reply a internal IP Address for PASV command. If this option be checked, FTPRush will replace this internal IP Address with IP address of FTP servers. Notes: when UPnP enabled and found a UPnP router, FTPRush will get external IP address from router directly.
Bind Sockets to IP Address: Sets the IP address to replace your intranet IP address when you are behind a NAT network and want use port mode to connect to a ftp server. It can be a domain name. FTPRush can automatically resolve it to IP address.
Bind Local IP Address to: Sets local IP address that FTPRush uses if you have more than one Ethernet card or IP address.
Limit Local Port Range: Limits ports or port ranges which FTPRush accepts When you are behind a NAT network and want use port mode to connect to a ftp server.