Multiple Domains with Unique IPs
Posted: Thu Jul 22, 2010 5:27 pm
Setup is 3 domains (General, Dedicated1, Dedicated2).
Server has 3 LAN IPs:
General = 10.1.1.1
Dedicated1 = 10.1.1.2
Dedicated2 = 10.1.1.3
CheckPoint Firewall-1 does static-nat (1 to 1) for each of these IP addresses:
General = 10.1.1.1 / 6.6.6.1 (EXT)
Dedicated1 = 10.1.1.2 / 6.6.6.2 (EXT)
Dedicated2 = 10.1.1.3 / 6.6.6.3 (EXT)
The issue is that I have the Listeners for each of these domain set to the internal IP (Ex. 10.1.1.1 port 21). No matter which of these I connect to, my firewall logs show that WingFTP is responding on the DEFAULT IP.
See, if someone connected to Dedicated1, I should see on the firewall internal 10.1.1.2 talking out, not 10.1.1.1. This causes an issue cause the client connecting is awaiting a response from 6.6.6.2 and is instead getting it from 6.6.6.1 and therefore not working...
If I change the default IP address of the server to any of the other domains, that FTP Domain is the one that starts working and the others stop working...
Server has 3 LAN IPs:
General = 10.1.1.1
Dedicated1 = 10.1.1.2
Dedicated2 = 10.1.1.3
CheckPoint Firewall-1 does static-nat (1 to 1) for each of these IP addresses:
General = 10.1.1.1 / 6.6.6.1 (EXT)
Dedicated1 = 10.1.1.2 / 6.6.6.2 (EXT)
Dedicated2 = 10.1.1.3 / 6.6.6.3 (EXT)
The issue is that I have the Listeners for each of these domain set to the internal IP (Ex. 10.1.1.1 port 21). No matter which of these I connect to, my firewall logs show that WingFTP is responding on the DEFAULT IP.
See, if someone connected to Dedicated1, I should see on the firewall internal 10.1.1.2 talking out, not 10.1.1.1. This causes an issue cause the client connecting is awaiting a response from 6.6.6.2 and is instead getting it from 6.6.6.1 and therefore not working...
If I change the default IP address of the server to any of the other domains, that FTP Domain is the one that starts working and the others stop working...