HTTPS issues using NAT

Please post here if you have problems in using Wing FTP Server.
Post Reply
tpg_patrick
Posts: 2
Joined: Wed Nov 16, 2011 5:07 pm

HTTPS issues using NAT

Post by tpg_patrick »

I am able to use https on the internal domain for file transfer but cannot get it working externally through the firewall.

Firewall rules are in place to allow any https traffic to external IP then DNAT to internal IP.
Also firewall is configured for the admin port 5466 in same manner.
Firewall log shows the traffic is allowed through.
Windows Firewall log does not show any dropped traffic.

Are there any settings on the WingFTP server I need to adjust?

Thanks
FTP
Site Admin
Posts: 2072
Joined: Tue Sep 29, 2009 6:09 am

Re: HTTPS issues using NAT

Post by FTP »

I think it is an issue on your firewall/router, please check it out.
tpg_patrick
Posts: 2
Joined: Wed Nov 16, 2011 5:07 pm

Re: HTTPS issues using NAT

Post by tpg_patrick »

FTP wrote:I think it is an issue on your firewall/router, please check it out.
Firewall / Router shows the traffic is passing through, not being blocked.
FTP
Site Admin
Posts: 2072
Joined: Tue Sep 29, 2009 6:09 am

Re: HTTPS issues using NAT

Post by FTP »

So could HTTP work correctly?

BTW, you can chat with us using live chat support on our website.
Post Reply