file won't transfer?

Please post here if you have problems in using FTP Rush.
Post Reply
voodoochild16

file won't transfer?

Post by voodoochild16 »

Hi all, I just finally configured FTP Rush for two SFTP servers to transfer files back and forth in between each other. Problem is, when I drag a file from one server to another, it won't even start the transfer process. The file is 8.9 GB's. Is there something I must enable to start the transfer????.

Thanks!.
FTP
Site Admin
Posts: 2072
Joined: Tue Sep 29, 2009 6:09 am

Re: file won't transfer?

Post by FTP »

FXP (server to server) transfer can be used for the FTP protocol only, so you can't use it for the SFTP transfer.
voodoochild16

Re: file won't transfer?

Post by voodoochild16 »

Thanks man, good to know.
maw2be
Posts: 1
Joined: Thu Mar 17, 2016 3:06 pm

Re: file won't transfer?

Post by maw2be »

I don't want to start new topic. but I have problem with ftp rush
I have two servers, vps, on both I'm root privelage, connect by normal FTP. when try to transfer files I's not allowing me.
I past log maybe you will know why

[T] Connecting to vpsroot
[T] Connecting to smart
[T] Resolving cloud04.mycpanelcloud.co.uk...
[T] cloud04.mycpanelcloud.co.uk => 31.216.48.16
[T] Connecting to 31.216.48.16:21
[T] 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
[T] 220-You are user number 16 of 250 allowed.
[T] 220-Local time is now 15:16. Server port: 21.
[T] 220-This is a private system - No anonymous login
[T] 220-IPv6 connections are also welcome on this server.
[T] 220 You will be disconnected after 15 minutes of inactivity.
[T] USER arleseyt
[T] 331 User arleseyt OK. Password required
[T] PASS (hidden)
[T] Connecting to 185.116.213.225:21
[T] 230 OK. Current restricted directory is /
[T] SYST
[T] 215 UNIX Type: L8
[T] TYPE A
[T] 200 TYPE is now ASCII
[T] REST 1
[T] 350 Restarting at 1. But we're in ASCII mode
[T] REST 0
[T] 350 Restarting at 0
[T] FEAT
[T] 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
[T] 220-You are user number 2 of 50 allowed.
[T] 220-Local time is now 15:16. Server port: 21.
[T] 220-IPv6 connections are also welcome on this server.
[T] 220 You will be disconnected after 15 minutes of inactivity.
[T] USER rmgroup
[T] 211-Extensions supported:
[T] EPRT
[T] IDLE
[T] MDTM
[T] SIZE
[T] MFMT
[T] REST STREAM
[T] MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
[T] MLSD
[T] AUTH TLS
[T] PBSZ
[T] PROT
[T] UTF8
[T] TVFS
[T] ESTA
[T] PASV
[T] EPSV
[T] SPSV
[T] ESTP
[T] 211 End.
[T] OPTS UTF8 ON
[T] 331 User rmgroup OK. Password required
[T] PASS (hidden)
[T] 230 OK. Current restricted directory is /
[T] SYST
[T] 200 OK, UTF-8 enabled
[T] PWD
[T] 215 UNIX Type: L8
[T] TYPE A
[T] 257 "/" is your current location
[T] 200 TYPE is now ASCII
[T] REST 1
[T] 350 Restarting at 1. But we're in ASCII mode
[T] REST 0
[T] 350 Restarting at 0
[T] FEAT
[T] 211-Extensions supported:
[T] EPRT
[T] IDLE
[T] MDTM
[T] SIZE
[T] MFMT
[T] REST STREAM
[T] MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
[T] MLSD
[T] AUTH TLS
[T] PBSZ
[T] PROT
[T] UTF8
[T] TVFS
[T] ESTA
[T] PASV
[T] EPSV
[T] SPSV
[T] ESTP
[T] 211 End.
[T] OPTS UTF8 ON
[T] 200 OK, UTF-8 enabled
[T] PWD
[T] 257 "/" is your current location
[T] TYPE I
[T] 200 TYPE is now 8-bit binary
[T] TYPE I
[T] 200 TYPE is now 8-bit binary
[T] Reversed FXP started
[T] PASV
[T] 227 Entering Passive Mode (185,116,213,225,35,251)
[T] PORT 185,116,213,225,35,251
[T] 500 I won't open a connection to 185.116.213.225 (only to 31.51.69.91)
Transfer Failed: node-v5.0.0.tar.gz
[T] (User Disconnect Connection)
[T] (User Disconnect Connection)
Failed 1 file(s) and Skipped 0 file(s)
[T] vpsroot Disconnected
[T] smart Disconnected
[1] Listening at IP: 192.168.1.13 PORT: 12181 for data connecting
[2] Listening at IP: 192.168.1.13 PORT: 12182 for data connecting
[1] PORT 192,168,1,13,47,149
[2] PORT 192,168,1,13,47,150
[1] 200 PORT command successful
[1] MLSD
Post Reply