Page 1 of 1

Infinite transfers

Posted: Tue Feb 09, 2010 1:50 am
by JohnK
Hello dev team.

I'm as glad as everyone here to see the development seems to resume.

Here i come with a featured bug:

FTPrush doesn't seem to limit itself to file and folder retry counts in some cases.
it may be due to unfinished file being uploaded on SRC also in loop,
FTPrush just refresh SRC and DEST before it transferts it again and again until some manual clearing
occurs.

If anyone got a more detailled comment, feel free to add, i'll just save a log next time i notice it.

Re: Infinite transfers

Posted: Thu Feb 11, 2010 1:27 am
by JohnK
Here's one of the possible logs you can get in these infinite transfers, notice that i've tried to set my retry file count to 0, 1 2 and other low values, it doesn't matter, when this occurs, a same file may be transfered for hours.


(00:27:45) [2] STOR abcdef.xyz
(00:27:46) [2] 150 File status okay; about to open data connection to
(00:27:46) [1] RETR abcdef.xyz
(00:27:46) [1] 550 abcdef.xyz: No such file or directory.
(00:27:46) [2] ABOR
(00:27:56) [2] 426- Read timed out
(00:27:56) [2] 426 Transfer failed, deleting file
(00:27:56) [1] CPSV
(00:27:56) [1] 227 Entering Passive Mode (xxx)
(00:27:56) [2] PRET STOR abcdef.xyz
(00:27:57) [2] 200 OK, will use x for upcoming transfer
(00:27:57) [2] PORT xxx
(00:27:57) [2] 200 FXP allowed. If you're not FXPing then set your IP to - (usually in firewall settings)
(00:27:57) [2] STOR abcdef.xyz
(00:27:57) [2] 150 File status okay; about to open data connection to
(00:27:57) [1] RETR abcdef.xyz
(00:27:57) [1] 550 abcdef.xyz: No such file or directory.
(00:27:57) [2] ABOR
(00:28:07) [2] 426- Read timed out
(00:28:07) [2] 426 Transfer failed, deleting file
(00:28:08) [1] CPSV
(00:28:08) [1] 227 Entering Passive Mode (xxx)
(00:28:08) [2] PRET STOR abcdef.xyz
(00:28:08) [2] 200 OK, will use x for upcoming transfer
(00:28:08) [2] PORT (xxx)
(00:28:08) [2] 200 FXP allowed. If you're not FXPing then set your IP to - (usually in firewall settings)
(00:28:08) [2] STOR abcdef.xyz
(00:28:08) [2] 150 File status okay; about to open data connection to
(00:28:08) [1] RETR abcdef.xyz
(00:28:08) [1] 550 abcdef.xyz: No such file or directory.
(00:28:08) [2] ABOR
(00:28:18) [2] 426- Read timed out
(00:28:18) [2] 426 Transfer failed, deleting file
(00:28:19) [1] CPSV
(00:28:19) [1] 227 Entering Passive Mode (xxx)
(00:28:19) [2] PRET STOR abcdef.xyz
(00:28:19) [2] 200 OK, will use x for upcoming transfer
(00:28:19) [2] PORT xxx
(00:28:19) [2] 200 FXP allowed. If you're not FXPing then set your IP to - (usually in firewall settings)
(00:28:19) [2] STOR abcdef.xyz
(00:28:19) [2] 150 File status okay; about to open data connection to
(00:28:19) [1] RETR abcdef.xyz
(00:28:19) [1] 550 abcdef.xyz: No such file or directory.
(00:28:19) [2] ABOR
(00:28:30) [2] 426- Read timed out
(00:28:30) [2] 426 Transfer failed, deleting file
(00:28:30) [1] CPSV
(00:28:30) [1] 227 Entering Passive Mode (xxx)
(00:28:30) [2] PRET STOR abcdef.xyz
(00:28:30) [2] 200 OK, will use x for upcoming transfer
(00:28:30) [2] PORT xxx
(00:28:30) [2] 200 FXP allowed. If you're not FXPing then set your IP to - (usually in firewall settings)
(00:28:30) [2] STOR abcdef.xyz
(00:28:30) [2] 150 File status okay; about to open data connection to
(00:28:30) [1] RETR abcdef.xyz
(00:28:30) [1] 550 abcdef.xyz: No such file or directory.
(00:28:30) [2] ABOR
(00:28:41) [2] 426- Read timed out
(00:28:41) [2] 426 Transfer failed, deleting file
(00:28:41) [1] CPSV
(00:28:41) [1] 227 Entering Passive Mode (xxx)
(00:28:41) [2] PRET STOR abcdef.xyz
(00:28:41) [2] 200 OK, will use x for upcoming transfer
(00:28:41) [2] PORT xxx
(00:28:41) [2] 200 FXP allowed. If you're not FXPing then set your IP to - (usually in firewall settings)
(00:28:41) [2] STOR abcdef.xyz
(00:28:42) [2] 150 File status okay; about to open data connection to
(00:28:42) [1] RETR abcdef.xyz
(00:28:42) [1] 550 abcdef.xyz: No such file or directory.
(00:28:42) [2] ABOR
(00:28:52) [2] 426- Read timed out
(00:28:52) [2] 426 Transfer failed, deleting file
(00:28:52) [1] CPSV
(00:28:52) [1] 227 Entering Passive Mode (xxx)
(00:28:52) [2] PRET STOR abcdef.xyz
(00:28:52) [2] 200 OK, will use x for upcoming transfer
(00:28:52) [2] PORT xxx
(00:28:53) [2] 200 FXP allowed. If you're not FXPing then set your IP to - (usually in firewall settings)
(00:28:53) [2] STOR abcdef.xyz
(00:28:53) [2] 150 File status okay; about to open data connection to
(00:28:53) [1] 550 abcdef.xyz: No such file or directory.
(00:28:53) [2] ABOR

Re: Infinite transfers

Posted: Fri Aug 13, 2010 9:11 pm
by leeenox
i got the issue too, i didnt found any solotuion or workaround to fix this.

eg.:

Code: Select all

[2] STOR 01-test.mp3
[2] 533 Requested action not taken. File not found in sfv.
[i] [sitex -> sitey ] Übertragung fehlgeschlagen: 01-test.mp3
this ends in a infinite loop and can only be stopped manually.

i also tried a clear tab but this does not affect the active tab....

any solutions here ?